Roller Bearing Gear Pump P30/31, P50/51, P75/76 series

Roller Bearing Gear Pump P30/31, P50/51, P75/76 series

  • working pressures to 2500 psi
  • Speeds up to 2400 rpm
  • Robust cast iron construction
  • A wide selection of standard shaft and mounting configuration
  • Multiple sections are available
  • Optional priority, two-speed, and unloader valves are available
  • Single and Multiple pump/motor, Flow Divider, Piggyback and Winch Motor configurations are available

CONTACT US

Head Office

© 2019 All rights Reserved. PT Jayatimur Intinusa Abadi

Rotary Flow Divider Intensifier FD30, FD50, FD75 series

Rotary Flow Divider Intensifier FD30, FD50, FD75 series

  • This eguipment divides a single oil flow input into
    several output streams, in direct proportion to the gear widths used.
  • The Rotary Flow Divider also acts as an intensifier, transferring energy from
    total oil flow to that portion being used.

CONTACT US

Head Office

© 2019 All rights Reserved. PT Jayatimur Intinusa Abadi

Multiple Section Pump

Multiple Section Pump

  • Available in up to five pump sections, providing five separate flows from a single
    output drive.
  • The individual flows can be tailored to suit most requirements over a range of speeds.

CONTACT US

Head Office

© 2019 All rights Reserved. PT Jayatimur Intinusa Abadi

Bush Bearing Pumps P315, P330, P350, P360 series

Bush Bearing Pumps P315, P330, P350, P360 series

  • Working pressures to 3500 psi
  • Patented interlocking body design
  • Bronze thrust plates
  • Tandem, triple and cross-frame pumps available
  • Wide range of integral valves for power steering, power brakes, fan drives and implement hydraulics
  • Reduced system noise levels compared to earlier models and competitors’ pumps
  • High power through-drive capability

CONTACT US

Head Office

© 2019 All rights Reserved. PT Jayatimur Intinusa Abadi

Fixed Displacement Gear Pumps and Motors

Fixed Displacement Gear Pumps and Motors

  • Commercial’s extensive range, with displacements from 10.6 to 249.9 cm³/r and working pressure to 3500 psi, can handle the most difficult and heavy work loads,
    efficiently and effectively.
  • A wide sellection if standart shaft and mounting configurations is available to suit most drive requirements.

CONTACT US

Head Office

© 2019 All rights Reserved. PT Jayatimur Intinusa Abadi

Sectional Directional Control Valve DVA 20/35

Sectional Directional Control Valve DVA 20/35

  • Maximum flow rate 40 GPM
  • Maximum operating pressure 2500 psi (172 bar)
  • Paralel and series circuit

CONTACT US

Head Office

© 2019 All rights Reserved. PT Jayatimur Intinusa Abadi

Sectional Directional Control Valve DVA 20/35

Sectional Directional Control Valve DVA 20/35

  • Maximum flow rate 70 GPM
  • Maximum operating pressure 3500 psi (241 bar)
  • Paralel and series circuit

CONTACT US

Head Office

Store

Sectional Directional Control Valve DVG 20/35

Sectional Directional Control Valve DVG 20/35

  • Maximum flow rate 70 GPM
  • Maximum operating pressure 3500 psi (241 bar)
  • Paralel and series circuit

CONTACT US

Head Office

© 2019 All rights Reserved. PT Jayatimur Intinusa Abadi

Sectional Directional Control Valve DVG 20/35 with selenoid operated

Sectional Directional Control Valve DVG 20/35 with selenoid operated

  • Maximum flow rate 40 GPM / 70 GPM
  • Maximum operating pressure 2500 psi (172 bar)
  • Paralel and series circuit

CONTACT US

Head Office

© 2019 All rights Reserved. PT Jayatimur Intinusa Abadi

AP 05 Series

AP 05 Series

  • model type AP0.5/0.25, AP0.5/0.5,AP0.5/0.75,AP0.5/0.9, AP0.5/1.2,AP0.5/1.6, APR0.5/0.25, APR0.5/0.5, APR0.5/0.75, APR0.5/0.9, APR0.5/1.2, APR0.5/1.6
  • Flow rate up to 1,6 cm³/r.
  • working pressure up to 3300 psi (230 bar)

CONTACT US

Head Office

Store